Home

Servers

Chassis

Power Supplies

Cooling Technology

AMD™ CPUs

Motherboard

Contact Us

Ordering

About Us

Thunder K7X (S2468) Motherboard

Tyan's Thunder K7X is Tyan's next generation dual-processor platform for the AMD Athlon MP processor. Like its predecessor (the Thunder K7), this system board provides cutting-edge performance for today's most demanding workstation and server applications, and includes powerful connectivity and storage support features. Based on the AMD-760 MPX chipset, the Thunder K7X utilizes a 66MHz 64-bit PCI bus for blistering I/O performance. It also supports DDR RAM, AGP Pro (as well as integrated VGA), dual LAN controllers, dual-channel Ultra 160 SCSI and more.

Standard Features | Back to Top |

	Processor Dual PGA462 ZIF sockets Supports up to two AMD Athlon MP processors Two onboard VRMs System bus support for 200MHz and 266MHz Processor speeds: CPU chart	Integrated 2D/3D Graphics ATI RAGE XL graphics controller 4MB frame buffer (SDRAM) Standard 15-pin analog VGA port
	Chipset AMD-760 MPX chipset AMD-762 north bridge & AMD-768 south bridge Winbond W83627HF Super I/O ASIC	Integrated SCSI (optional) Adaptec AIC-7899W controller Dual-channel Ultra 160 SCSI support 160MB/sec maximum data throughput per channel Support up to 15 LVD SCSI devices per channel Channel A and Channel B - 68-pin connectors
	System Memory Four 2.5v 184-pin DDR DIMM sockets 25° angled sockets enable rackmount installation Supports up to 4GB of Registered PC2100 DDR memory Supports ECC (72-bit) memory modules	Server Management (optional) Tyan-defined 50-pin header connects to Server Management Daughtercard (SMDC), which supports the Intelligent Platform Management Interface (IPMI) Q-Logic Zircon Baseboard Management Controller (BMC) Support for IPMI, SDR, SEL, FRU I2C and IPMB
	Hardware Monitoring Winbond W83782D hardware monitoring ASIC 3-pin fan monitoring headers CPU temperature and voltage monitoring	BIOS Phoenix BIOS 4Mb Flash ROM Supports APM v1.2 and ACPI v1.0 User settings for hardware monitoring Auto-configuration of IDE hard drive types Multiple boot options DMI 2.0 compliant
	Expansion Slots One AGP Pro slot; also supports 4x AGP One 64-bit 66MHz (3.3-volt) PCI slot One 64-bit 66MHz (5-volt) PCI slot Three 32-bit 33MHz (5-volt) PCI slots Total of six usable slots	Form Factor Extended ATX footprint (13" x 12", 330.2mm x 304.8mm) One 24-pin and one 8-pin ATX-GES power connectors Stacked parallel (one), serial (one) and VGA (one) ports Side-by-side LAN (two) port Stacked keyboard and mouse ports
	Integrated I/O One floppy connector supports up to two drives One 9-pin 16550-based serial port One 25-pin SPP/ECP/EPP parallel port Four USB ports (two via optional cable) PS/2 keyboard and mouse port	Regulatory FCC DoC (Declaration of Conformity) certified European CE (Declaration of Conformity)
	Integrated PCI IDE Dual-channel master mode Supports up to four enhanced IDE devices Support for ATA-100/66/33 IDE and ATAPI compliant devices
	Integrated LAN Two 3Com 3C920 LAN controllers 10/100Mbps data transfer rate per controller